AIR TREATMENT & VENTILATION
1. AIR TREATMENT UNITS
These units are available in floor mounted and ceiling suspended variants; with combination of mixing box, primary & secondary filter, evaporative cooling module, spray type scrubber module, choice of DIDW blower & final filter depending upon their application.
There are various unit sizes available, covering air capacities from 1,000 to 42,000 cfm for static pressure requirement up-to 6 in. W.G.
Available in double/single skin pre-coated steel sheet construction. The units can also be supplied in other materials of construction such as galvanised/stainless steel as per specific requirements.
SPRAY TYPE SCRUBBER
It is based on the adsorption principle of using water droplets for removal of aerosol and gaseous pollutants. It consists of a chamber containing spray nozzles, a sump for collecting spray water as it falls, water distribution and an eliminator section for removing entrained drops of water from the air. With its unique design of nozzle bank, it attains 95% scrubber efficiency.
FILTERS & ELECTROSTATIC PRECIPITATOR
Wide range of filters & electrostatic precipitators are classified in table 1 (under introduction to this section), depending upon their efficiencies to provide a comfortable and healthy indoor environment which is important to the well being of people and environmental health.
EVAPORATIVE COOLING MODULE
Based on natural principle of cooling upon evaporation. It creates a comfortable climate with the optimal combination of temperature and humidity. It has low installation, running and maintenance costs and is an environment friendly and efficient choice for climate control in hot and dry weather conditions. It consists of a spray header and a water distribution, sump.
Available in various material and the cellulose based media which attains up-to 95% saturation efficiency.
2. VENTILATION UNITS
AXIAL FLOW FANS
CONAIRE Axial Flow fans are second to none. Considering workmanship, standards and performance ratings. Each fan is put through a rigorous inspection regime both after manufacturing and before despatch.
Available in wide range of air delivery from 1,000 cfm to 82,000 cfm upto 3" WG static pressure.
The cast alloy aluminium impellers are statically and dynamicaly balanced with high efficiency airfoil section blades. Available in direct\pulley driven propulsion with foot mounted TEFC motors suitable for 3 phase, 440 volts, 50 Hz AC supply.
The fans are available for wall mounted or duct mounted applications.
ON DEMAND CAR PARK VENTILATION
It includes a CO & CO 2 sensor integrated with a controller to affect energy savings by reducing ventilation rates during low movement of vehicles and at the same time taking care of local building codes by maintaining CO levels within permissible limits.
The system also provides a fail-safe smoke exhaust in case of fire and a manual override to override sensor and provide maximum ventilation.
INLINE CABINET/ DUCT FAN
Made out of galvanised steel complete with high efficiency forward/ backward curve impeller, direct mounted single phase squirrel cage induction motor with sealed bearing.
Available with inlet and outlet connection, and mounting brackets, optional internal acoustic lining. Electronic speed regulator is also available for performance & temperature control.